BAUMIT StarTex Alkali resistant fibreglass reinforcing mesh 145g/2 - 50m2
- Brand: BAUMIT
- Product Code: BASTTE50
- Delivery date: Next Day
- Ex Tax: £45.10
Description: Baumit StarTex, is an easy to use, SBR coated, fibre glass
reinforcing mesh with a 4 x 4mm mesh size. It is designed for use with contact
mortars and masonry base coat renders/plasters and can be used in all
Intended use: Baumit StarTex is bedded in to a wet render/plaster. When reinforcing a thick-coat base coat this is done wet-in-wet by applying 2/3rds of the render and whilst wet trowelling in the StarTex. The final third of the render should be applied immediately. Each piece of StarTex should overlap adjacent pieces by at least 100mm in all directions.
When applying to thin layer renders, again using a wet-in-wet process, the render should be combed first to ensure the correct thickness and then the StarTex trowelled in to it. A further 1-3mm of render should be applied over the StarTex to ensure the correct bedded depth. The render should be between 3 and 8mm in thickness depending on substrate and render.
When using as corner reinforcement in thin layer renders, strip of mesh which are at least 300 x 300mm square should be diagonally applied in a tight coat of contact mortar, such as MC55, to the corners of openings before the main areas are rendered. If using a thick-coat render then this can be applied, as above, in with the render coat.
|Technical data sheet/baumit_StarTex.pdf File Size 90.14KB Downloaded: 340|